CSM Forum Banner

Probability( Standard Deviation)

Discuss PMP doubts, tips and lesson learned. iZenBridge makes PMP® Certification easy
nazrulq
Contributor
Contributor
Posts: 239
Joined: Sun Feb 26, 2017 6:06 am

Probability( Standard Deviation)

Postby nazrulq Wed Jul 05, 2017 1:24 am

Question: Project Manager Charted to deliver 5000 units that are 60 centimeters each. Upper Control Limit 63 cm
while lower control limit 57 cm. Approximately what percentage will be above 61cm?

Answer :

1. 68.3%
2.31.7%
3. 95.5%
4. 15.9%

Correct Answer : 4

Can somebody explain!
VCAB
Participant
Participant
Posts: 71
Joined: Wed Dec 21, 2016 4:26 pm

Re: Probability( Standard Deviation)

Postby VCAB Wed Jul 05, 2017 1:37 pm

Well let me attempt this:
Question: Project Manager Charted to deliver 5000 units that are 60 centimeters each. Upper Control Limit 63 cm
while lower control limit 57 cm
. Approximately what percentage will be above 61cm?


The question is seeking to know the percentage that is above 61cm (that means it is only concerned about one tale of the bell curve)

First is to discover the means, which the question says is 60cm
Then we need to find the SD= P-O/6= In this question the upper limit of 63cm is the pessimistic and the lower of 57cm is the optimistic
SD= 63-57/6= 1
This means the SD from the means limits are: Mean- SD and Mean + SD=== 59-61
Since only 50% of the bell curve that we seek= 1-SD/2= 1-.683= .313/2= .1585 = 15.9%

Return to “PMP® Open Forum”

Who is online

Users browsing this forum: No registered users and 8 guests